Product information
2-component addition primer for application on old antifouling. Applied by roller application on self-polishing or hard antifouling before painting the new antifouling. Loose antifouling layers are thus anchored and the basis for further coats is created. Not suitable for thin layer antifouling. Colour: grey. Mixing ratio: base | hardener 2:1.
Hints
Additional links
CLP-/REACH-Notice
Symbol
GHS03 - Flame over circle: Oxidising
GHS05 - Corrosion: Corrosive
GHS07 - Exclamation Mark: Health hazard/Hazardous to the ozone layer
GHS09 - Environment: Hazardous to the environment
Signalword
Danger!
Hazard Statements
H226: Flammable liquid and vapour.
H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H318: Causes serious eye damage.
H335: May cause respiratory irritation.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.
Precautionary statements
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310: Immediately call a POISON CENTER/doctor/.
P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
P403 + P235: Store in a well-ventilated place. Keep cool.
P501: Dispose of contents/container to .
Reviews
Antifouling for your boat
Over time, the paint on your boat weathers and loses its former beautiful lustre. This also means that the boat's hull is no longer protected. To restore your boat to its original appearance, it needs to be repainted.
To the guide