No results were found for the filter!
Made from double-loop-braided polyester with elastic twine that acts like a spring.
(€2.83 / 1 Meter)
Niro chain claw with 3 m line
This chain claw reduces impact on an anchor chain. The 3 m spliced line (included) means that the claw can also be used as a shock absorber.
AnchorRoll anchor buoy
AnchorRoll - it's good to know where your anchor is. The anchor and anchor chain is the only connection between the boat and solid ground. The AnchorRoll marks exactly your anchor position so that everyone can see it and can react...
Boat hook bracket ring
Sprenger boat hook bracket ring. Up to 7 mm wire. Material: stainless steel.
FSE Robline Rio
The FSE Robline� Polyester Rio is a kink-free mooring line with a high breaking load and good stretch characteristics. Very UV-resistant and easy to splice. A classic!
FSE Robline Orion 500
The FSE Robline Orion 500 is an all-purpose PES on mini spool. Suitable for all types of applications. Very high-quality braid.
(€0.40 / 1 Meter)
Liros PES mooring line
The Liros PES mooring line is made from 3-strand twisted continuous polyester yarn and has good tensile properties. At one end there is a spliced Niro grommet; at the other, a 27-cm spliced loop. Does not harden in water, abrasion-proof...
Lofrans foot switch
Foot switch for electric anchor or sheet windlasses. The stainless-steel housing is watertight. The shatterproof plastic protective cap ensures that the switch cannot be operated accidently. Option of black or red rubber cap and �UP� and...
Lofrans circuit breaker
Circuit breaker for anchor windlasses. Switches off power in the event of a short circuit. Protects the electric motor from overloading using time/power-based switching. Voltage: 12 / 24 V.
Yellow mooring buoy
Yellow mooring buoy to mark anchor position in order to avoid unintentional collisions with other yachts’ anchors. With an eyelet.
Whether you use it at the bow or at the stern as a kedge line, it always runs out cleanly and can be wound in quickly – no more fighting to get the twists out of a coiled rope. Leave it permanently mounted to the rail or to the underside...