No results were found for the filter!
Mr. Mooring mooring line holder
Mr. Mooring makes mooring easier. The perfect mooring line for secure mooring. No risk of tangling the line in the propeller and no more algae on the mooring line from slipping into the water. Mr. Mooring makes mooring easier and more...
KONG mooring hook
Mooring hook made from 13-mm-thick stainless steel. Can be used on a boat hook without any attachment. Very large opening means simple handling. The locking device prevents accidental opening by moving and turning. Length: 20 cm;...
Lofrans Type L switch
Small switchboard for flush-mounting with up/down switch. A well-equipped double relay is necessary for lifting and lowering operation. Voltage: 12 V / 24 V. Installation depth: 28 mm. Dimensions: 80 x 25 mm.
Lofrans foot switch
Foot switch for electric anchor or sheet windlasses. The stainless-steel housing is watertight. The shatterproof plastic protective cap ensures that the switch cannot be operated accidently. Option of black or red rubber cap and �UP� and...
Lofrans circuit breaker
Circuit breaker for anchor windlasses. Switches off power in the event of a short circuit. Protects the electric motor from overloading using time/power-based switching. Voltage: 12 / 24 V.
Made in high quality stainless steel. The devil's claw is a special chain hook which prevents the anchor chain from denting the bow fitting or damaging the bow roller. The claw simply hooks through the chain, taking the load of the...
made of stainless steel. The chain stopper takes the load off the anchor windlass and extends its life.
Chain fall protector
made of stainless steel, self-clamping. To secure the chain or relieve the anchor winch during anchoring.
for connection the chain with the anchor; an indispensable advantage, above all when operating anchor winches and bow rollers.
made of stainless special steel for connecting the chain with the anchor. The swivel prevents the chain from twisting when heaving up the anchor.
Anchor-chain swivel with joint
The swivel prevents the chain from twisting in case of strong movements of the ship. The additional joint prevents that the anchor comes to rest the wrong way up on the anchor roll when hauling up
Emergency chain link
An emergency connection for two anchor chains or in case of a ruptured anchor chain. Simply open the emergency link, place both ends inside and close again. Stainless steel.