Deck Flooring

Deck coverings on sailing yachts and motorboats must fulfil high requirements. It is exposed to weather influences such as heat, cold, rain or frost, aggressive UV radiation, dirt and mechanical stress. Added to this are vibrations and movements of the hull. The material and bonding must be of high quality and professionally processed in order to withstand wind and weather in the long term.

Deck coverings and adhesives are exposed to very high temperatures, especially in the Mediterranean. The colour and material should therefore store as little heat as possible. The intense, almost year-round UV radiation causes many plastics to become brittle and crack. As a result, penetrating salt water can destroy the bonding in the long term. All deck covering materials - whether composites, coatings or paints - must be highly weather-resistant. When choosing a coating and adhesive, it is also essential to ensure that they are resistant to salt water.

Treads on deck and in the cockpit must be extremely slip-resistant, even in wet conditions. A surface that is non-slip even when covered in water makes an important contribution to the safety of the crew when working on deck. A special anti-slip coating and the innovative anti-slip system are relatively easy to apply and can be reapplied again and again. They are also available in different colours to match the ship. Anti-slip deck coverings achieve their anti-slip effect through their material and structure. Abrasion resistance, temperature insensitivity, acid and diesel resistance and ease of cleaning are criteria for a good deck covering. It should also be permanently flexible so that it does not come away from the curves and bends of the deck. On and below deck, safety at night can be further improved by gluing on strips and coverings that are self-luminous. When applying smaller anti-slip strips and anti-slip pads, the surface must be carefully cleaned, degreased and sanded beforehand. Special primers may also be required for optimum adhesion. Self-adhesive anti-slip pads make installation much easier. They are available in various sizes and can also be cut to size.

Recently viewed products