Oil pumps

Oil pumps - everything you need to change the oil in your boat engine or outboard motor.

Filling petrol and gear oil so that the boat engine or outboard runs smoothly and evenly is easy. However, as soon as the oil needs to be changed once a year - as is the case with all engines - it usually becomes difficult for inexperienced skippers. So it's a good thing that you can not only buy fresh gear oil for the oil change, but also various pumps to help you empty the oil tank beforehand. There are various methods for emptying the tank, each with different accessories.

The Liquifix shaker pump - draining oil without electricity.

The easiest way to transfer gear oil or petrol to empty the respective tank is probably our Liquifix shaker pump. Whether for an outboard motor or a boat engine below deck - this oil suction pump works without electricity and without manual suction. The trick lies in the patented suction head, which works like a non-return valve. By simply shaking it, the liquid (petrol or gear oil) is drawn evenly through the suction head and runs behind the valve through the PVC hose into the desired container.

The Starbrite transmission oil pump - from the transmission directly into the canister

You connect the hose with the metal connection to your transmission (please observe the manufacturer's instructions and purchase an adapter if necessary) and screw the plastic connection - depending on the fluid - onto your oil or petrol canister. An additional oil change pump should not be necessary here.

The oil drain pump

Our range also includes the Compass oil pump with a plastic hose. This is a very clean solution, as you generally do not come into contact with the oil or petrol. You simply operate the pump so that the oil from the tank is sucked directly into the canister.

Petrol hose with pump ball

The petrol hose with pump ball is especially recommended for siphoning off petrol, as you do regularly for winter storage of your boat, for example. The ends of the hose are kept open so that you can add the connection points as required.

Oil change pump with 12 V

This pump can be used universally. You can use it to drain petrol, transmission oil, water, antifreeze and other liquids - and all electrically. The principle is based on a self-priming gear pump that runs on electricity (12 V, 6 A). This oil change pump is supplied with an oil change kit. The kit includes a 1.80 m long cable with battery terminals including a flat fuse and 2 hoses with diameters of 6 mm and 8 mm. You do not need a filter!

We can only give you a brief overview of the options for changing the oil or petrol in your boat engine or outboard motor, as every engine is different. Contact us, we will be happy to advise you.

Recently viewed products