Product information
The TyeTec® Loop block series: TyeTec® Loop products always have one thing in common: they are particularly lightweight and very heavy-duty components for rig and deck. TyeTec® loop blocks and what makes them so special TyeTec® loop blocks can actually be reduced to two components: the pulley and the loop, which carries the pulley through the central hole and thus absorbs the force acting on the pulley. All other components such as the side plates, connectors and so on are almost irrelevant for the transmission of force. For this reason, TyeTec® loop blocks can be particularly light for very high breaking and working loads. Snatch blocks with two-stage ball bearing (code gray) long loop. The snatch blocks can be opened by twisting the side panels so that halyard, reefing line or sheet can be easily inserted. The side plates of the snatch blocks are locked against each other in the working position. This enables higher working loads to be achieved even with non-symmetrical loads. The Dyneema® SK 75 HSS loops are polyurethane-coated and support the blocks through the central axis so that very high breaking and working loads can be achieved. 'High load' snatch block long loop with two-stage ball bearing for greater comfort Side plates: Milled aluminium, hard anodized Central axle: Stainless steel 1.4404 Washer: POM or aluminium (60) Loop: Dyneema® SK 75 Loop lock: stainless steel toggle 1.4404 Velcro strap: yes Chafe protection: Dyneema®
Reviews