Product information
The UML Pro Sensor Elite 24g to 60g maintenance and refill set contains the new Pro Sensor Elite trigger from United Moulders. Many new lifejackets are equipped with this trigger. The rearming set contains a gas cartridge and a cylindrical release unit with paper element. It should be replaced at least every 2 years. 1x gas cartridge 1x gray cartridge with trigger.
This special release cartridge is suitable for the Elite ProSensor automatic system from UML, which has been installed in many lifejackets from various manufacturers since 2018.
The spare set for rearming your lifejacket after triggering.
The right CO2 cartridge for your lifejacket can be found in the corresponding operating instructions. The required size is also printed or stamped directly on the buoyancy aid (inside the protective cover next to the cartridge).
Note:
- Replace empty and corroded / rusted CO2 cartridges with new replacement CO2 cartridges.
- When checking the lifejacket, please always remove the CO2 cartridge before operating the cocking lever of the release device, otherwise the lifejacket will be activated.
This special release cartridge is suitable for the Elite ProSensor automatic system from UML, which has been installed in many lifejackets from various manufacturers since 2018.
The spare set for rearming your lifejacket after triggering.
The right CO2 cartridge for your lifejacket can be found in the corresponding operating instructions. The required size is also printed or stamped directly on the buoyancy aid (inside the protective cover next to the cartridge).
Note:
- Replace empty and corroded / rusted CO2 cartridges with new replacement CO2 cartridges.
- When checking the lifejacket, please always remove the CO2 cartridge before operating the cocking lever of the release device, otherwise the lifejacket will be activated.
Properties
| Accessories | Reserve sets |
|---|---|
| Various | Spare sets |
Reviews
Customers also bought
-63%
from £25.99 £69.99