Slide valve bilge valve Lenzer

Slide valve in different sizes for sealing at the stern. The integrated slide valve can be pushed up and down to direct the water in the boat. The slide valve has a diaphragm as a non-return valve. The two-piece set is delivered consisting of the slide valve for inboard and the counterpart for outboard incl. two sealing rings. The bilge hole must have a minimum diameter of 39mm so that the system can be integrated. The diameter is 39mm for all three sizes. The distance between part A and part B is the one indicated in the table, i.e. the thickness of the ship's side. The thicker the dropside / rear wall, the larger the bilge valve must be ordered.