YC screw fix

SCHRAUBENFIX is an anaerobic adhesive that cures in the absence of oxygen and in contact with metal. After complete drying for approx. 24 hours/ 20°C, screw and threaded connections are reliably secured against unintentional loosening due to impact or vibration loads.

Material data:
- Content: 10 ml
- Color: blue
- Viscosity: 2000-4000 mPas

CHARACTERISTICS

SCHRAUBENFIX is an anaerobic adhesive that cures in the absence of oxygen and in contact with metal. After complete drying for approx. 24 hours at 20°C, screw and threaded connections are reliably secured against unintentional loosening due to shock or vibration loads.

FIELD OF APPLICATION

Yachtcare SCHRAUBENFIX reliably secures screw and threaded connections against unintentional loosening due to shock or vibration loads. The metals (screws - nuts) must be active materials such as brass, copper, iron, steel and bronze.

PRODUCT DATA

Chemical characterization: Methacrylate, anaerobic resin
Content: 10 ml
Color: blue
Viscosity: 2,000 - 4,000 mPas Brookfeld LV Spindle 64; 30 rpm
Density: 1.04 - 1.08 g/ml
Max. Thread diameter: M36
Flash point: >100 °C
Processing temperature: optimal at 23 °C
Storage: Store in a cool, dry place Shelf life: 12 months at an optimum temperature of 23 °C
Hand strength: after 5-15 minutes
Final strength: 24 hours
Breakaway torque: 20 - 30 Nm
Unscrewing torque: 20 - 30 Nm
Temperature range: - 55 °C to 150 °C
Measured on the screw: M10 x 20 - quality 8.8 - quality 8.8 galvanized - nut 0.8d (without preload), after 24 hours.

PROCESSING

Apply SCHRAUBENFIX evenly to the threaded surface and assemble the elements. Completely fill the gap between the two parts, then assemble the parts and seal them completely. Do not move once the curing process has started. Allow to cure completely for 24 hours before fully loading. "The screw connection can be disassembled with normal tools."

precautionary measures

Please refer to the applicable safety data sheet and the relevant information sheets of the Employer's Liability Insurance Association of the Chemical Industry for information on handling and disposing of the products. The above information, in particular the suggestions for the application and use of our products, is based on our knowledge and experience under normal conditions. Due to the different materials, substrates and deviating working conditions, no guarantee of a work result or liability, regardless of the legal relationship, can be established either from these instructions or from verbal advice, unless we are guilty of intent or gross negligence. The user must prove that he has provided us in writing with all the information required for a proper and promising assessment in good time and in full. Third-party property rights must be observed. In all other respects, our respective terms and conditions of sale and delivery shall apply. The latest technical data sheet, which should be requested from us, shall apply.