Product information
GELCOAT FARBE is a high-quality paint formulation in an aerosol spray can. The paint layer forms a glossy final seal for small repairs in the gelcoat or laminate area. Specially combined fillers reduce run-off when repairing vertical surfaces. The resin and filler combinations meet the highest quality requirements for GRP repairs. Suitable for polyester substrates in above-water areas. Material data Content: 400 ml spray can Colour: RAL 9010 - pure white, 9001 - cream white
Hints
Additional links
Properties
Colour | white 9001 |
---|
CLP-/REACH-Notice
Signalword
Danger!
Hazard Statements
EUH066: Repeated exposure may cause skin dryness or cracking.
H222: Extremely flammable aerosol.
H229: Pressurized container: may burst if heated.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.
Precautionary statements
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211: Do not spray on an open flame or other ignition source.
P251: Do not pierce or burn, even after use.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P271: Use only outdoors or in a well-ventilated area.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312: Call a POISON CENTRE/doctor/ if you feel unwell.
P337 + P313: If eye irritation persists: Get medical advice/attention.
P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501: Dispose of contents/container to .
Reviews
Manufacturer information (according to GPSR):
Responsible for the EU (according to GPSR):