SunWare FOX-MD1 remote display

The FOX-MD1 is a remote display for various FOX units. The remote display can be easily connected to the FOX unit with the ready-to-use cable. The two-line display with 20 characters means that it is easy to read the data measured by the FOX devices. Alongside the text are bar charts, e.g. to show the charge status of the batteries. Parameters such as the battery type on the connected FOX device can also be changed via the keypad. Due to the large backlit display data can be easily read even in dark environments. If no key is pressed for 10 sec., the backlight switches off automatically. The contrast can be adjusted via the menu. The FOX-MD1 will display different data depending on the unit connected. Parameter values and functional settings can also be changed for the specific device connected. The FOX-MD1 can be used as built-in or surface mounted unit. A mounting frame is therefore included with every FOX-MD1. A 5-m cable is included. The maximum cable length is 10 m. 12V / 24V system voltage.