Savings offer: 2x 0.75L Compass C18 plus paint tray set!

Compass C18 Thin Film Antifouling is a highly effective solution for boat owners looking for reliable fouling protection in Northern European waters. With its extremely smooth and low-friction surface, it offers an excellent alternative to International VC17m and is ideal for motor and sailing boats.

Important features

• Reliable fouling protection: Effectively protects against light to medium fouling.


• Low layer build-up: Enables easy application without complex pre-treatment.


• Directly recoatable: Saves time and effort during application.


• Application area: Suitable for all Northern European waters, both inland and coastal areas.


• Alternative product: Replaces VC17 and VC Offshore from International.

Technical details

• Yield: Approx. 11 sqm/l


• Contents: 750 ml / 2 litres

Application instructions

Stir the product well before use. The powder is contained in a bag under the plastic lid. After mixing, the mixture should be stirred regularly during processing. The finished mixture can be used for up to seven days if stored with the lid closed.

Backgrounds and application

• GFK/Blankes Gelcoat: Sand lightly, wash off with water and allow to dry. Apply at least 1 coat of Compass Epoxy Primer, followed by 2 coats of C18.


• Steel/lead: Surface must be dry, clean and rust-free. Apply 6 coats of Compass Epoxy for corrosion protection, followed by 2 coats of C18.


• Wood: Surface must be dry, clean and in good condition. Prime with Compass Epoxy Primer and then apply 2 coats of C18.

Drying times

• Hand dry:
  
  
  
  • 5 °C: 60 minutes
  
  
  • 23 °C: 20 minutes
  
  
  
  


• Draining:
  
  
  
  • 5 °C: 6 hours
  
  
  • 23 °C: 2 hours
  
  
  
  


• Overcoating interval:
  
  
  
  • 5 °C: 16 hours
  
  
  • 23 °C: 6 hours
  
  
  
  

Please note that Compass C18 is not suitable for aluminium or galvanised surfaces.