SeaTalk NG to VHF NMEA 0183 Converter Kit

The SeaTalk NG to VHF NMEA 0183 Converter is an essential solution for integrating GPS position data from the modern SeaTalkNG network into legacy VHF radios that rely on the NMEA0183 protocol. This kit allows you to utilise important distress and safety features required in many legacy DSC VHF radios.

Technical details

• Power supply:
  
  
  
  • Peak operating current: 50 mA
  
  
  • Peak supply current: 950 mA
  
  
  • Voltage range: 9 to 16 V DC
  
  
  • Nominal voltage: 12 V DC
  
  
  
  


• Environmental conditions:
  
  
  
  • Relative humidity: Up to 95%
  
  
  • Water tightness: IPx6
  
  
  • Storage temperature: -20 °C to +65 °C
  
  
  • Operating temperature: -10 °C to +50 °C
  
  
  
  


• Physical specification:
  
  
  
  • Connections: 2x SeaTalkNG backbone, 2x SeaTalkNG track, 1x NMEA0183 track
  
  
  • Dimensions: Height: 30.2 mm, Width: 109.45 mm, Depth: 21.45 mm
  
  
  
  


• LEN (NMEA2000 Load Equivalency Number): 1

Scope of delivery

• 1x power cable 2 m (6.6 ft) to power the SeaTalk NG backbone


• 1x SeaTalkNG track connection cable 1 m (3.3 ft) for connection to the SeaTalkNG backbone network


• 1x SeaTalkNG cable (white stripe) to NMEA0183 (2 wires), 1 m (3.3 ft) for the connection of a NMEA0183 VHF radio


• 1x SeaTalk1 to SeaTalkNG converter kit for the connection of SeaTalk-devices


• 2x SeaTalkNG dummy plugs to cover unused connections


• 2x SeaTalkNG terminating resistors for correct termination of the backbone

Compliance

The kit complies with EMC Directive 2014/30/EU and is C-Tick certified in Australia and New Zealand, Conformity Level 2, certified.

With the SeaTalk NG to VHF NMEA 0183 converter kit, you get a reliable and effective solution to supply your old radios with modern GPS data and thus increase safety at sea.