The International Micron 350 is a powerful, polishing anti-foulant that offers protection from growths for several seasons. Suitable for fresh and saltwater condition conducive mild or severe fouling. The constant polishing effect prevents the formation of thick layers and guarantees a low-friction surface while maintaining the release of an optimum level of biocides, including when the boat is laid-up. Can be applied up to 6 months prior to contact with water. Surfaces: GFRP, wood, steel and lead. Not suitable for: Aluminium, galvanised surfaces. The product is a substitute for Micron Extra EU and Micron Extra WA. All new anti-fouling products are entirely compatible with the products that they replace and can be directly applied over most traditional anti-fouling product types, provided that these are in good condition (with the exception of VC 17m, Vc 17m Extra). All new international anti-fouling products can be applied as usual with a brush or roller, and in some cases also using a spray gun. The manufacturer recommends not diluting this product in order to prevent the coating from failing prematurely. Coverage: 9m²/l (coated), 3m²/l (sprayed). Use biocidal products safely. Always read the label and product information before use. SIGNAL WORD Attention HAZARD STATEMENTS H224 - Flammable liquid and vapour. H317 - May cause an allergic skin reaction. H410 - Very toxic to aquatic life with long-lasting effects. PRECAUTIONARY STATEMENTS P101, P102, P103, P280, P210, P271, P273, P303+P361+P353, P362 + P364, P235, P501