Mini ON-OFF battery switch

MAIN FEATURES Ignition protection-safe for installation on board a petrol-driven boat Housing design allows surface or panel mounting Insulating cover with snap-on sections protects back contact TECHNICAL DETAILS Switch positions: 2 - On/Off Battery combination: No Colour: Red Alternator field disconnect: No (Disconnect switch protects the diodes in the alternator if the switch is turned OFF with the engine running. If the disconnect switch is not used to protect the alternator, an LED can be connected to the AFD terminals to indicate when the battery switch is in any position but not OFF). Maximum voltage: 48V DC Clamping bolt torque: 13.56 Nm Continuous charging current: 300 Amps. Peak charge current: 500 Amps (5 min.) Starting current 30 sec.: 900 Amps. The current required by the starter motor before starting the engine. The starting current varies significantly during the starting cycle. Initially there is a large surge of current required to overcome the inertia and compression of the engine. This surge can be two to four times the average starting current.The starting current is used for sizing batteries, cables and battery switches. Battery input: 1 Cable spacing for 4/0 AWG cable: 28.45 mm Recommended cable thickness: 4/0 AWG (120mm²) Mounting holes: #10 Screws Size Clamping bolt: 3/8' - 16 (M10) Weight: 0.29 kg