Product information
Mente Marine ACS RP fully automatic trim tab control for existing trim tab systems. Nominated for the European Innovation Award 2015! Suitable for systems from: Bennet, Lenco, Eltrim, QL Volvo Penta, Trimmaster, Instatrim, TFX Teleflex, TX Controls, Lectrotab, Uflex, Ultraflex. Simply replace the existing trim switch with the one from Mente Marine - connection of 6 cables. For older hydraulic systems, a cable may have to be laid to the pump. Then calibrate at speed - done! The deep-V hulls of modern sports boats are designed to give you a smooth ride in rough water. The stronger the chine, the greater the need to maintain a straight course with trim tabs. The roll and lateral tilt depend on the wind and the position of the passengers. The longitudinal pitch, also known as the trim attitude, depends on the speed and the load. If the course changes, the wind direction also changes and the boat must be re-trimmed. If passengers change their position, the boat must be re-trimmed. This need to constantly adjust the trim position to the changing load conditions distracts the skipper unnecessarily and therefore represents a safety risk at high speeds. The automatic trim system (ACS) takes this work off your hands. The system automatically compensates for trim changes caused by wind, a new course or changes in the seating position of passengers. The ACS RP (Roll
Reviews
No questions have been asked about this article yet.











