2 From 6

Hempel?s Silic One Fouling Release

Hempel
Discover Hempel's latest innovation and technological excellence - the new, silicone-based fouling release system! This fantastic, biocide-free product is based on silicone and hydrogel, which gives the coating properties similar to water. This makes it harder for the organisms that create ... More

Important item information

Item excluded from special offers and promotions.

Order number 289641

Content: 0.75 Liter (€75.93 * / 1 Liter)
Column Price
€56.95 * incl. VAT

Availability: in stock

  Price Order number Contents in ltr
€56.95 289641 0,75
 

Product information "Hempel?s Silic One Fouling Release"

Discover Hempel's latest innovation and technological excellence - the new, silicone-based fouling release system! This fantastic, biocide-free product is based on silicone and hydrogel, which gives the coating properties similar to water. This makes it harder for the organisms that create fouling to settle on the hull and make them fall off faster when the boat is in motion. Other distinct advantages include the fact that the fouling is easy to remove and the coating can be reapplied, which reduces long-term costs. Silic One boasts revolutionary new properties that overshadow everything else. Give your boat a complete makeover! Colours: Red, black What is behind the Fouling Release System? ? Coating below the waterline to prevent fouling ? Creates a non-stick surface ? Biocide-free ? Copper-free What is hydrogel? Hydrogel is based on a unique, non-reactive polymers, which form an invisible protective layer between the hull surface and the water. The organisms that create fouling perceive the hull as liquid and cling to it much less readily. Can hydrogel be reform after being removed? The polymers responsible for the formation of hydrogel are distributed evenly in the coating. If the original hydrogel is removed, a new layer of hydrogel immediately forms when the polymers responsible for the formation of hydrogel come into contact with water. HOW THE SILICONE FOULING RELEASE SYSTEM WORKS In contrast to antifouling, the Fouling Release System avoids the use of biocides. This product is based on silicone and hydrogel, which gives the coating properties similar to water. This makes it harder for the organisms that create fouling to settle on the hull and make them fall off faster when the boat is in motion. The cost of the Fouling Release System is higher in the first year, but the maintenance costs are lower from the second year onwards. Silic One reduces friction and ensures a higher speed and fuel savings. The Fouling Release System can be used for all boat surfaces other than wood. Untreated (new) surfaces: Clean with a suitable cleaning agent and dry-sand with P120 sandpaper. Clean carefully with water and leave the surface to dry. For optimum protection apply four coats of Hempel?s Light Primer 45551 (Please note the recommended time between coats on the tin). Treated surfaces: In order to achieve the best results, all antifouling coatings must be removed and the epoxy coat exposed. Clean carefully with water and leave the surface to dry. Apply a coat of Hempel's Light Primer 45551. How to use: Flat brushes or rollers are suitable for applying the primer and tiecoat. Please read the manual before applying paint and follow the instructions. Avoid painting in inclement weather! Instructions: 1. Apply a coat of Hempel's Light Primer* 2. Apply a coat of Hempel's Silic One Tiecoat 27450* As the products are sensitive to moisture, please only open the tin directly before use. The primer must cover the entire surface to guarantee optimum adhesion. A wet film thickness of 100 ?m is recommended. Pour the paint into a paint tray and close the tin while applying the paint. Time between coats: Apply Tiecoat at: 20 ?C: min. 4 hours, max. 72 hours after applying Hempel?s Light Primer 10 ?C: min. 6 hours, max. 72 hours after applying Hempel?s Light Primer If the time between coats is exceeded, a new coat of Hempel?s Light Primer / Tiecoat must be applied. The paint can be used within an hour of opening the tin. An open tin cannot be stored for later use. 3. Apply two coats of Hempel's Silic One 77450. As the products are sensitive to moisture, please only open the tin directly before use. Upon initial application of Hempel?s Silic One 77450, two coats are necessary. In the following seasons one coat is enough. Pour the paint into a paint tray and close the tin while applying the paint. Hempel?s Silic One can be used within an hour of opening the tin. An open tin cannot be stored for later use. ? FIRST COAT Hempel's Silic One Apply a wet film thickness of at least 100 ?m. Time between coats: 20 ?C: min. 8 hours, max. 48 hours after applying Hempel's Silic One Tiecoat 27450 10 ?C: min. 16 hours, max. 48 hours after applying of Hempel's Silic One Tiecoat 27450 If the time between coats is exceeded, a new coat of Tiecoat must be applied. ? SECOND COAT Hempel?s Silic One Apply a wet film thickness of at least 100 ?m. Time between coats: 10 - 20 ?C: min. 16 hours. The boat can enter the water 24 hours after applying last coat. The maximum time between the last coat and the time the boat enters the water is one month. Cleaning Fast motorboats (min. 20 knots) Hempel's Silic One is self-cleaning on fast motorboats. Slow boats - sailing boats The coating can be cleaned as often as is necessary/desired in order to achieve a clean surface with extremely low friction. Hempel's Silic One is easy to clean. Choose one of the following options: OPTION 1: Clean the surface with a high-pressure washer (fresh water) OPTION 2: Use a micro-porous sponge or cloth, then rinse with a hose. Ensure that the surface is not scratched while cleaning. Important: No not use brushes with hard bristles! Maintenance It is simple and straightforward to maintain Hempel's Silic One. The maintenance costs are lower than for traditional antifouling. In order to maintain functionality, a new coat of Hempel's Silic One should be applied every year. If the boat is out of the water for more than a month, it should be cleaned using Hempel?s Boat Shampoo and a new coat of Hempel's Silic One should be applied before it re-enters the water. If the boat remains in the water for the entire year, a new coat may not be necessary, but more frequent cleaning will be. FAQs ? Does Hempel?s Silic One save fuel? Yes, the easy surface cleaning means the surface is largely free of fouling and reduces friction in the water. ? Does Hempel?s Silic One make boats faster? Yes, the reduced friction of a clean coating increases speed. ? Can Hempel?s Silic One be applied at low temperatures? Hempel?s Silic One can be applied at temperatures from 10 ?C? ? How sensitive is Hempel's Silic One to moisture? The surface must be dry before applying Hempel?s Silic One. Hempel?s Silic One Tiecoat and Hempel?s Silic One may not be applied in unstable weather or onto a wet surface. ? When can the boat enter the water after applying Hempel?s Silic One? The boat can enter the water between 24 hours and one month after applying Hempel?s Silic One. ? Can Hempel?s Silic One be applied to an old coat of antifouling? No - and this is important to note - the old coat of antifouling must be removed until the epoxy layer or the uncoated base layer, after which a new coat of Hempel's Light Primer should be applied, followed be a coat of Hempel?s Silic One. ? Is it possible to paint over Hempel?s Silic One with a traditional antifouling product? If you return to a traditional antifouling system, the coat of Hempel?s Silic One must be removed. Only silicone-based fouling release products adhere to Hempel?s Silic One. ? At what speed does self-cleaning take place? Self-cleaning is particularly effective at high speeds. Even at low speeds, self-cleaning is possible if the boat is in constant use. ? Does this mean that the coating will be subject to mechanical damage more quickly? Although you scratch silicone with your fingernail it may seem more mechanically sensitive, if the power is effective on a large area, e.g. a fender, silicone has good abrasion resistance. This is mainly due to the fact that the coating is soft and the energy is absorbed. ? What do I do if the Hempel?s Silic One coat is scratched? Hempel?s Silic One is easy to repair - simply reapply the colour system to the damaged area. Use biocides safely! Always read the label and product information before use.
 

Onward links to "Hempel?s Silic One Fouling Release"

Further products by Hempel